What makes an airplane get off the ground and stay in the air? Easy to understand, the film combines animation and live sequences to explain everything about basic aerodynamics. Forces of lift, weight, thrust and drag are shown in relation to flight.
THE RIGHT STUFF / L’ETOFFE des HEROS
Captain Charles « Chuck » YEAGER broke the sound barrier with the help of his friend Jack RIDLEY on a 14th of October 1947 – He did it 61 years ago!
(U. S. Air Force illustration/Mike Carabajal)
Photo: U.S.Air Force Link
XLR-11 ROCKET POWERED AIRCRAFT
Birth of Manned Rocket Research Airplanes: 1946 to 1975
The first reliable, effective rocket engine that would provide boost for experimental research aircraft was produced by four members of the American Rocket Society (ARS) who combined forces to form Reaction Motors Incorporated (RMI) (Rockaway, New Jersey) for developing the Experimental Liquid Rocket (XLR-11) rocket motor. The XLR-11 engine had four separate rocket chambers. Each chamber provided 1500 lb of rated thrust and could be operated independently as a means of throttling thrust in quarters, up to 6000 pounds. The XLR-11 possessed remarkable longevity, powering an impressive fleet of rocket aircraft for more than a quarter of a century (1946 to 1975). This fleet of vehicles were the first rocket aircraft devoted solely to high performance experimental flight research. They were not constrained by military or commercial demands and ranged from being the first to break the sound barrier (XS-1), to the first to reach Mach 2.0 (D-558-II [fig. 5]), to the first to exceed the X-2 Mach 3.2 record (X-15 with two XLR-11 engines).
Figure 5. The D-558-II airplane on Rogers lakebed.
The X-1E – Early Development of Energy Management
Design efforts to extend aircraft performance produced increased wing loadings, W/S, and decreased lift-to-drag ratios, L/D. These design changes were beneficial in reducing drag to achieve supersonic and hypersonic speeds, but were also detrimental in that they reduced the area of the maneuvering footprint and presented difficulties in the approach and landing.
As L/D values decreased, the glide slope angle and the rate of descent increased, making it more difficult for pilots to estimate distances and times required for acceptable landings. The X-1E (fig. 6) was modified with a low-aspect-ratio wing having a thickness-to-chord ratio of four percent – the only aircraft of the X-1/D-558 series to have sufficiently low L/D values to require unique energy management techniques. This X-1E was the first to experiment with approach patterns designed to give
the pilot more time in the traffic pattern to manage energy.
The landing pattern was approached in a conventional manner except that altitudes and speeds were somewhat higher than for
powered aircraft. The initial reference point was established at 12,000 ft (mean sea level) on a downwind heading (180 deg remaining to turn). The downwind leg was offset some four miles from the centerline of the landing runway. On downwind, abeam the touchdown point, landing gear and partial flaps were deployed at a speed of 240 knots. Full flaps were usually deployed on the final approach. At the initial reference point the pilot had almost three minutes until touchdown – additional time for handling increased speeds and sink rates.7,8
Figure 6. The X-1E airplane on Rogers lakebed.
Report from www.archives.gov
(Text from the NASA at: http://www.nasa.gov/centers/dryden/home/index.html)
A few days after he succeeded in crossing the Channel, I thought it was time to show who and what gave Yves Rossy the incentive to perform such breathtaking feats. Let’s have a look at this hero’s career.
When he was a child, he said « When I am older, I will be pilots » – with an S ! This became his motto from the day he got unable to go down from a tree by himself. The child has now become « Fusionman ». In order to understand what motivated this pilot, watch and listen to Yves Rossy’s comments (in French) on the video below:
As he explained, Yves Rossy has always admired the first pioneers. Every attempt used to end by death or breakthrough. Yves Rossy has now become « Fusionman », the first man flushed in a jet-engine-propelled wing, flying as if he were Icarus.
Yves Rossy was born on the 27th of August 1959 in Neufchatel – Switzerland. Both gazing skywards, and having his feet firmly planted on the ground, he was taught technical education and passed a mechanics baccalauréat. Natural-born sportsman, he has practised everything that glides, slides, or flies – surfing, waterskiing, wakeboarding, skysurfing, parachuting, aerobatics, motorcycling, rafting, hang-gliding, etc. Flying with a jet-powered wing is the crowning of a 30-year career and numerous stunts, feats, and premieres.
Certainly one of the most intense periods in his career. Yves Rossy flew the supersonic Mirage III for 15 years. During this period, he flew some historical aircraft such as the Hunter or the Venom, one of the first English jet-engine fighters. He got the idea of going round Switzerland throughout several activities within a day. He carried out this feat on the 3rd of July 1991. During his trip, he flew a DC-9, went motorcycling, skiing, snowboarding, mountaineering, paragliding, mountain-biking, bungee-jumping, he flew a helicopter, went skydiving, rafting, hydrospeeding, canoeing, drove a sportscar, went hang-gliding, horse-riding, barefooting, waterskiing, wakeboarding, and finally speedboating – that’s enough… 25 vehicles were used this day along 1,000 km for 15 hours and a half! Yves Rossy is a Swiss Air Force retiree, and keeps flying the two-seater Hunter belonging to the association Amici del Hunter. He works as a captain at Swiss Airlines, and his spare-time is dedicated to his passion. He has been supported since February 2007 by Jean-Claude BIVER, HUBLOT watches’ CEO.
HE FANCIES DOING WHAT NEVER HAPPENED BEFORE
Yves Rossy is used to venturing off the beaten tracks. He devotes all his hobbies to flight in all its forms. He multiplies the tests on contrivances that change with the passing experiments. An inflatable wing made him get over the 12-kilometer distance between the two shores of Lake Geneva. Many stunts were reported such as hang-gliding over the huge Geneva spray to surf on top of it, then land on the lake to grab a waterskiing handle, and get to the shore without getting wet! Another feat – he skydived on a disk over the Matterhorn. As Yves Rossy whished to get beyond his feats and dreams, he wanted to fly with as little instrumentation as possible – like a bird with the ability to move and steer into space, he got the idea of adding scale model jet engines under a wing.
The first attempt occurred in March, 2003. The German Jet-Cat company supplied the engines which were added under an inflatable wing, but this trial was a failure for lacking of rigidity. He developed a rigid spreadable carbon wing built-up at ACT Composites’ in 2004. It made an indifferent start. He spun and had to drop his wing at Al-Ain airshow. The wing parachute tore, and the device was damaged. From that time, the pilot worked hard to improve the spreading of the wing and aerodynamics at the wing tips in order to provide more stability. He achieved two flights with a two-jet-engine-propelled wing in 2005. He had a narrow shave a month later: an uncontrollable sway led him to drop his wing which crashed. After a long year and two extra jet engines added, the wing became more secure. As a matter of fact, the 5’40 » over Bex – Switzerland – came up as an awaken dream for this pioneer. Since then, Yves Rossy has relentlessly been training to optimize his wing. Yves was compelled again to drop his prototype wing while in a new test flight in April 2007. The wing was seriously damaged and took a few months to be repaired. In the aftermath of this failure, Yves Rossy decided to build up a new, more reliable, higher-performance wing. Since early 2008, his wings have become more and more sophisticated.
Finally, Yves « Fusionman » « Rocketman » « Jetman » Rossy found his place in Aviation History on the 26th of September 2008, having joined Calais – France – to Dover – England. Congratulations to Yves Rossy and thanks to MEDIA IMPACT and its staff which supplied me with materials and information to write a post about Yves Rossy.
Please visit their website at: http://www.jetman.com/
WING SPECIFICATION SHEET
I must have been pretty busy last months for I’ve just realized that I haven’t added the Philip SHAWCROSS’s sites so far !!! This must be corrected right now: Mister SHAWCROSS is the author and founder of « English for aircraft ».
His two books make up undoubtedly the cleverest way of teaching technical English, especially for ESOL students. His renowned software « Docwise » is a must for the engineers and mechanics desiring to be trained as far as technical English and aeronautics are concerned. Click on the logo on your left handside to visit « Bwise2 », his website dedicated to aviation English language training for mechanics and pilots. Bwise2 can provide everything you need to learn technical English within the scope of aeronautics.
Bwise2 is not his only asset. Philip SHAWCROSS is the president of the International Civil Aviation English Association – ICAEA – a non profit-making association created under the 1901 French law.
To bring together people and organizations concerned by or interested in the use of English in the aviation and aeronautical world.
To promote the exchange of information as regards English, English training, standards, qualifications, translation, documents etc, between people working within aviation in different countries.
To centralise information useful to the Airlines, Authorities, Air Traffic Services, manufacturers, pilots, engineers, universities, research institutes, training centers and teachers.
To enhance the circulation of this information through a web site, a list serve, seminars and the publication of their proceedings.
Finally, to generate concern about the quality of English in the aviation world. Please click on the logo hereafter to visit the ICAEA website: