PASSENGERS DID BELIEVE THEIR AIRCRAFT WOULD CRASH

 

Scary flight onboard British Airways BA 0206 – It happened over the Atlantic Ocean at 35,000 feet on Friday January 13, 2012 at 03.00 AM.

The passengers were given the scare of their lives by an emergency message which said that the aircraft was about to crash into the ocean, and that they have to brace themselves for impact. It just was not true, as the message was pre-taped, and was sent-out by mistake. The flight attendants dashed into the cabin to calm down the panic surging. Then, an announcement added that such warnings – if re-iterated – should be diregarded.

British Airways has apologized to the people who were onboard BA 0206 for this incident. Watch the video:

 

Facebooktwitterlinkedinmail

Hudson river ditching – January 15, 2009

Thanks to both Pierre, and Xavier who shared this link, you can see how the events unfolded, and how – thanks to the pilot Chesley « Sully » Sullenberg, the flight officer Jeffrey Skiles, and the air traffic controller’s self-control – the flight 1549 passengers remained unscathed: (you can read the radiocommunication transcript in the bottom right corner of the video hereafter)

Facebooktwitterlinkedinmail

MAIN LANDING GEAR (MLG)

Aircraft main landing gear

Figure 1-11 Main landing gear. conventional  type.

The tricycle gear is more stable during ground operations and makes landing easier, especially in crosswinds. It also maintains the fuselage in a level position that increases the pilot’s visibility. Nearly all Navy aircraft are equipped with tricycle landing gear.

A main landing gear assembly is shown in figure 1-11. The major components of the assembly are the shock strut, tire, tube, wheel, brake assembly, retracting and extending mechanism, and side struts and supports. The shock strut absorbs the shock that otherwise would be sustained by the airframe structure during takeoff, taxiing, and landing. The air-oil shock strut is used on all Navy aircraft. This type of strut is composed essentially of two telescoping cylinders filled with hydraulic fluid and compressed air or nitrogen.

Source: http://www.tpub.com

Facebooktwitterlinkedinmail